logo
Thuis ProductenDe Stof van Metaaramid

160gsm Flame Resistant Aramid Needle Felt with PTFE Membrane Laminated Meta Aramid Felt for Protective Garments

Certificaat
CHINA Jiangsu Tiandizao Newmaterial technology Co.,Ltd certificaten
Ik ben online Chatten Nu

160gsm Flame Resistant Aramid Needle Felt with PTFE Membrane Laminated Meta Aramid Felt for Protective Garments

160gsm Flame Resistant Aramid Needle Felt with PTFE Membrane Laminated Meta Aramid Felt for Protective Garments
160gsm Flame Resistant Aramid Needle Felt with PTFE Membrane Laminated Meta Aramid Felt for Protective Garments 160gsm Flame Resistant Aramid Needle Felt with PTFE Membrane Laminated Meta Aramid Felt for Protective Garments 160gsm Flame Resistant Aramid Needle Felt with PTFE Membrane Laminated Meta Aramid Felt for Protective Garments 160gsm Flame Resistant Aramid Needle Felt with PTFE Membrane Laminated Meta Aramid Felt for Protective Garments 160gsm Flame Resistant Aramid Needle Felt with PTFE Membrane Laminated Meta Aramid Felt for Protective Garments

Grote Afbeelding :  160gsm Flame Resistant Aramid Needle Felt with PTFE Membrane Laminated Meta Aramid Felt for Protective Garments

Productdetails:
Plaats van herkomst: China
Merknaam: tiandizao
Certificering: EN 11612
Modelnummer: TDZ-9865986
Betalen & Verzenden Algemene voorwaarden:
Min. bestelaantal: 1000 meter
Prijs: USD 8 per meter
Verpakking Details: Reguliere verpakking: Rolverpakking met PE-folie + geweven zak, 50m of 100m per rol. Kartonnen verpa
Levertijd: 30 werkdagen
Betalingscondities: L/C, T/T
Levering vermogen: 100.000 meter per maand

160gsm Flame Resistant Aramid Needle Felt with PTFE Membrane Laminated Meta Aramid Felt for Protective Garments

beschrijving
Oppervlaktegewicht: 160GSM Breedte: 150 cm
Dikte: 0,3–1,2 mm scheursterkte: ≥100N
Bedrijfstemperatuur: tot 200℃ (onmiddellijk 240℃) Membraangewicht: 50 gsm PTFE
Markeren:

160gsm Aramid Needle Felt

,

PTFE Membrane Laminated Meta Aramid Felt

,

Flame Resistant Aramid Needle Felt

Product Introduction Our aramid needle felt laminated with PTFE membrane is made of 80% meta aramid fiber mixed with 20% para aramid fiber, manufactured by needle punching process, then thermally compounded with 50gsm expanded microporous PTFE membrane. Total areal weight: 160gsm, width:150cm. Meta aramid provides stable heat insulation, inherent flame retardancy and low shrinkage at high temperature. Para aramid greatly improves tensile strength, tear resistance and abrasion

Contactgegevens
Jiangsu Tiandizao Newmaterial technology Co.,Ltd

Contactpersoon: Mr. Jack

Tel.: +86-18220501709

Fax: 86-512-52010711

Direct Stuur uw aanvraag naar ons (0 / 3000)